view cart menu separator categories menu separator faq
advanced search
categories  > my ebay (101)
MSA Altair® Pro Single-Gas Detector, Hydrogen Sulfide (H2S)
2 images
 
MSA Altair® Pro Single-Gas Detector, Hydrogen Sulfide (H2S)
MSA Altair® Pro Single-Gas Detector, Hydrogen Sulfide (H2S)

MSA Altair® Pro Single-Gas Detector, Hydrogen Sulfide (H2S)

Price: $149.00 add to cart     
Feedback: -74.03%, 12 sales Ask seller a question
Shipping: US-Mainland: free (more destinations)
Seller's Country: India
Condition: Used
Payment with:
shayonaelect Store DetailsFeatures & Applications:The MSA Altair Pro Single-Gas Detector quickly delivers accurate readings of Carbon Monoxide concentrations and displays results on the LCD screen, while also alerting the user via the adjustable alarm set points. Alarms can be adjusted to low, high, TWA and STEL. Ultra-bright flashing LEDs, a >95dB audible siren and vibrating alarms also alert users, and the last 50 alarm or test events are recorded and through active datalogging. Preferences for alarm set points can be changed by connecting the unit to an MSA infrared adapter using the built-in IR communication port.The MSA Altair Pro features superior dust and water protection, excellent impact resistance, and great RFI performance. The sensors and battery can easily be replaced to keep the unit performing perfectly for years.Features:Tough rubberized housingOne-button operationDisplays information on a large, clear, backlit LCD.Superior dust and water protection (rated IP 67)Event-logging and data-loggingExcellent impact resistanceGreat RFI performanceAdjustable alarm set points are offered for LOW, HIGH, TWA and STELAlarms are indicated by flashing LEDs, an audible alarm, and an internal vibrating alarm.Replaceable battery and electro-chemical sensorApplications:ChemicalConstructionElectric UtilityFirefightingGas DetectionGeneral IndustryHazardous MaterialsIndoor Air QualityManufacturingNuclearOil and GasWater/WastewaterHazards:Leak DetectionOxygen DeficiencyToxic Atmosphere IDLHToxic Atmosphere Non-IDLHSpec Summary:Size:3.4”L x 2.0”W x 1.0”HWeight:4.0 oz including clipCase Material:Polycarbonate with rubber overmoldingEvent Log:Equipped with standard event data logging of no less than 50 events before overwriting oldest logged eventsData Log:Equipped with standard data logging featureEnvironmental Protection:Rated to IP 67 protection levels for dust/water ingressDisplay Location:Display is viewable from the frontUser InterfacesDisplay Type:Liquid crystal display [LCD] with large, easy to read characters. Displays gas concentration in PPMAlarms:Equipped with visual, vibrating and audible alarms.Audible alarms sound at an average of 95 dB @ 1 foot.Visual alarms are bright and viewable from top, front and sides.Buttons:One push-button operationBump Test:A checkmark is displayed to indicate a successful bump test for 24 hours after conducting the bump test.Operating Lifetime:Typical battery life is greater than one year after installation. Sensors life is two years.Confidence Flash:Unit periodically (average every 60 seconds) confirms proper operation by: Confidence flash on Alarm LEDs;Confidence dot on display (heartbeat indicator)Backlight:Activated at the start of any alarm situation or by a simple press of a buttonMonitoring:Sensor Type:Electro-chemicalRange:0-200 ppmResolution:1 ppmStandard Alarm Points:Low:10 ppmHigh:15 ppmSTEL:15 ppmTWA:10 ppmInstrument PowerBattery:Replaceable CR2 lithium battery. Only Energizer EL1CR2, Varta CR2, or Panasonic CR2 batteries should be usedCalibrationCalibration:Zeroes and calibrated easily using one buttonCalibration Set Point:Calibration gas concentration set points are user-adjustableTools:Tubing, cylinder and regulator. No calibration cap requiredData Storage:Capacity:50 past eventsRecord Content:Event log entries shall contain as a minimumAlarm: type, value, time and dateAlarm clear: type, value, time and dateCalibration: pass/fail, time and dateBump: pass/fail, time and dateError non-shutdown: error type, time and dateEnd of life: reason, alarm minutes, months life, time and dateData Retention:Accessible at the end of instrument lifeDatalogging:Equipped with datalogging function. Default setting is three minute peak readings. This sample rate is configurable via PC 15 seconds to 15 minute peaks or one minute peak average.Certifications:Intrinsic Safety Approval:The detector must meet global approvals per:UL Class 1, Division 1, Groups A, B, C and D Tcode T4CSA Class 1, Division 1, Groups A, B, C and D Tcode T4ATEX II 2G EEx ia IIC T4Australia Ex ia IIC T4Quality System:Certified compliant with ISO 9001 provisionsManufacturing:Made in the USAEnvironmental:Temperature:Normal Operation: -20 to 50 °CHumidity:10-95% RH non-condensingMaintenance and Warranty:Maintenance:Replaceable sensors and battery
Other Products from marinemarketindia:View all products
Set of 3 AscoTherm IMO86 Thermal Protective Aid
$29.00
Vintage 9" SUNDO Germany Aneroid Ships Barometer
$99.00
Ensure Personal Alcohol Breath Tester
$99.00
JRC JLR 4510 GPS Navigator in Working Condition for Small Boats
$99.00
Furuno IC112 Antenna For Felcom 12   System
$299.00
TI-45N Wall Thickness Gauge Complete Kit, Range 0.040 - 8.00 "
$441.99
Cassens & Plath Bearing Sight for Magnet Compass aka Azimuth Device No 8164
$144.00
Drager X-am-3000  Gas Detector up to 4 Gases
$149.00
Casio NameLand Biz Label Writer KL-S20 for 6mm-24mm Tapes
$99.00
Tepra PRO Tape Cartridge 18mm X 8m Black Ink
$99.00
Last Updated: 18 Nov 2016 09:00:51 PST home  |  about  |  terms  |  contact
Powered by eCRATER - a free online store builder